Tie wraps are used in a variety of applications. Particularly in the automotive and electrical industries, there are going to be times when you need to use a tie wrap in an area that is extremely hot. If you don&#;t purchase a wrap that can handle the high temperatures, you will end up with melted plastic. This can result in even more problems than not having a wrap on the wires or other items you used them on.
Zhonggu contains other products and information you need, so please check it out.
If you look under the hood of your car, you will notice there are a lot of different tubes and hoses. Mechanics will commonly use high temperature tie wraps to help keep certain hoses together. In the event that they come apart, it can result in problems under the hood.
As your engine continues to heat up, it&#;s going to produce a variety of hot gases under the hood. This means that everything under the hood is going to be exposed to the heat. The solution is for a mechanic to use high temperature tie wraps to prevent disturbing the wraps. If they cannot handle the heat, then they will be inefficient.
Mechanics are going to use quality products because most of them offer a warranty on parts and labor. Without using a quality tie, they are going to end up with customers back into their garage wondering what happened.
The same can be said about electricians and solar panel technicians. They offer warranties on both products and workmanship. If they stop using quality materials, their is going to ring off the hook. Cables and wires will be bundled together frequently to ensure that it provides a neat appearance, make it easier to connect to mainframes, and to be able to label everything appropriately.
On top of the house where solar panels are seated, it&#;s very likely to get hot quickly. It wouldn&#;t be uncommon for a tie to be exposed to 110 degrees or even hotter due to the metal. As a result, high temperature tie wraps are used.
If you are looking for more details, kindly visit High-temperature cable ties.
Where HVAC systems and electrical panels are concerned, the same high temperature scenarios exist. No one wants to deal with a wrap that has melted because it can leave wires exposed and cause malfunctions within the system.
The heat resistant material Polyamide 4.6 is suitable for temperature applications up to +150° C. Besides its resistance to high temperatures, PA46 is also highly rigid. PA46 products also offer good fire safety properties at high temperatures and excellent resistance to chemicals.
Advantages of the heat resistant material PA46:
&#; For temperatures ranging from -40 °C to +150 °C
&#; High-quality plastic that can be recycled easily
&#; High rigidity, even at high temperatures
&#; High operating temperature range up to +150 °C (5,000 hours)
&#; High dimensional stability, even under the effect of heat
&#; Very good fire safety properties
&#; Excellent resistance to chemicals
Have a look at our PA46 product selection:
Heat resistant cable ties:
- T-Series inside serrated cable ties
- OS-Series outside serrated cable ties
- V-Series cable ties with 90° angled head, outside serrated
- DH-Series cable ties with 2 heads (create an inside and outside serrated loop) for parallel routing
(of two bundles with only one cable tie)
- KR-Series cable ties locked by glass fibre pin, for use as a method of securing bellows on steering racks, water hoses and vacuum lines
Heat resistant cable ties with fixing elements:
- Cable ties for Autotool Series, automatic bundling up to Ø 20 mm
- 1-piece fixing ties with arrowhead, with wings, for use in many different industries, including automotive, aerospace and panel building
- 1- and 2-piece fixing ties with fir tree, with disc
- 1-piece fixing ties for weld studs (hardpush), releasable
- 1-piece fixing ties for Weld, moveable
- 2-piece fixing ties for Weld Studs
- 2-piece fixing ties with coupler for parallel separation
- 1- and 2-piece fixing ties with pipe clip
- Cable set clip for cable diameter 5 and 6 mm
- 2-piece fixing ties for edges, 1.0 - 3.0 mm, side fixing
- 2-piece fixing ties for heavy duty applications, for screws
Heat resistant fixing elements:
- Bundling clips with arrowhead for distance routing
- Bundling clips for edges, 1,0 - 3,0 mm
- Blind plugs
More variants and dimensions are available on request. Please contact us for more information.
If you want to learn more, please visit our website Stainless Steel Cable Ties.